Home » Bobcat » Bobcat 463

Bobcat 463

Bobcat 464 specs
ManufacturerBobcat
Model463
TypeSkid steer loader
Lift DesignVertical
Years Made2001-2008

Bobcat 463 Specs

The information for the Bobcat 463 specs are provided down below. When going through the Bobcat 463's detailed technical specifications, you should bear in mind the model year that the vehicle was produced in. The specs of the Bobcat 463, including its weight, horsepower, lifting capacity, and other aspects, were published with the help of the manufacturer's manuals. Before you buy the Bobcat 463, you should check with your vendor to make sure the technical specs have been confirmed. To be of assistance to you in making your buying decision, we will shortly include our evaluation of the Bobcat 463.

Operating Specifications

USMetric
Horsepower22.5 HP16.8 kW
Lifting Capacity (35% Tipping)500 lbs226.8 kg
Lifting Capacity (50% Tipping)700 lbs317.5 kg
Operating Weight2708 lbs1228.3 kg
Tipping Load1405 lbs637.3 kg
Lift Breakout Force1450 lbs657.7 kg
Tilt Breakout Force2025 lbs918.5 kg
Max. Travel Speed6.5 mph10.5 km

Cycle Time

Raise Lift Arms3.6 sec.
Lower Lift Arms2.5 sec.
Bucket Rollback2.1 sec.
Bucket Dump2.3 sec.

Hydraulic System

USMetric
Pump Flow10.0 GPM37.1 LPM
Relief Pressure3000 psi206.8 Bar
Optional FlowN/A
Hydraulic Capacity4.0 gal15.1 L
How much can a Bobcat 463 lift?

The Bobcat 463 weighs 700 pounds.

What year was the Bobcat 463 made?

A Bobcat 463 was produced from 2001 to 2008.

How much does a Bobcat 463 weigh?

Bobcat 463 is 2,700 pounds in weight.

How many HP is a 463 Bobcat?

The 463 Bobcat has 22.5 HP.

What engine is in a Bobcat 463?

The engine that powers the Bobcat 463 is a Kubota D1005-E2B model.

How much oil does the Bobcat 463 hold?

The Bobcat 463 has a 1.2-gallon oil capacity.

Engine Specs

ManufacturerKubota
ModelD1005-E2B
TypeDiesel
Cylinders3
EmissionsTier 2
Rated Speed3000 RPM
Torque Power2200 RPM
CombustionSpherical type
Compression Ratio24.1
Firing Order1-2-3
USMetric
Gross Power22.5 HP16.8 kW
Net Power21.8 HP16.3 kW
Displacement61.1 cu. in.1001 cc
Bore3.0 in.7.6 cm
Stroke2.9 in.7.4 cm
Peak Torque43.0 ft-lb58.3 N∙m
Coolant Capacity1.5 gal5.7 L
Engine Oil Capacity1.2 gal4.7 L
Fuel Tank Capacity6.5 gal24.6 L

Dimensions

USMetric
Height71.4 in.181.3 cm
Bucket Hinge Pin94.5 in.239.9 cm
Width35.4 in.90.0 cm
Length100.5 in.255.3 cm
Dump Height74.5 in.189.1 cm
Dump Reach18.0 in.45.8 cm
Ground Clearance5.5 in.14.0 cm
Dump Angle36°
Rollback Angle25°
Departure Angle25°

Tire Size

Front23 x 5.7-12
Rear23 x 5.7-12

Bobcat 463 Review

Reliability
Specifications
Price

The Bobcat 463 is commonly used in confined areas. A purchase like this might be doable if you have a light load and frequently need to navigate narrow passages.

error: Content is protected !!