Home » Bobcat » Bobcat S175

Bobcat S175

Bobcat s175 specs
TypeSkid steer loader
Lift DesignVertical
Years Made2002-2013

Operating Specifications

Horsepower46.0 HP34.3 kW
Lifting Capacity (35% Tipping)
Lifting Capacity (50% Tipping)1750 lbs793.8 kg
Operating Weight5808 lbs2634.5 kg
Tipping Load3900 lbs1769.0 kg
Lift Breakout Force3400 lbs1542.2 kg
Tilt Breakout Force3240 lbs1469.6 kg
Max. Travel Speed7.3 mph11.7 km

Cycle Time

Raise Lift Arms3.5 sec.
Lower Lift Arms2.5 sec.
Bucket Rollback1.8 sec.
Bucket Dump2.3 sec.

Hydraulic System

Pump Flow16.9 GPM64.0 LPM
Relief Pressure3300 psi227.5 Bar
Optional Flow26.4 GPM100.0 LPM
Hydraulic Capacity8.5 gal32.2 L
How much can a BOBCAT S175 lift?

Bobcat S175 lifts 1,750 lbs.

What replaced the Bobcat S175?

Bobcat S530 replaced s175.

How much does a Bobcat S175 weight?

The Bobcat S175 has a weight of 5,800 pounds.

What year was the BOBCAT S175 made?

The Bobcat S175 was produced from 2002 to 2013.

What engine is in S175 Bobcat?

The engine that powers the Bobcat S175 is manufactured by Kubota and is model number Kubota V2203-M-DI.

Is a S175 Bobcat high flow?

The Bobcat S175 has a high flow of 26.4 GPM.

How big is a Bobcat S175?

The Bobcat S175 has a height of 76 inches, a length of 130 inches and a width of 66 inches.

Engine Specs

ModelKubota V2203-M-DI
Rated Speed2800 RPM
Torque Power1700 RPM
CombustionSpherical Type (E-TVCS)
Compression Ratio23.0
Firing Order1-3-4-2
Gross Power46.0 HP34.3 kW
Displacement134 cu.in.2197 cc
Bore3.3 in.8.3 cm
Stroke3.6 in.9.2 cm
Peak Torque103.5 ft-lb140.3 N∙m
Coolant Capacity3.0 gal11.3 L
Engine Oil Capacity2.4 gal9.0 L
Fuel Tank Capacity23.0 gal87.1 L


Height76.3 in.193.8 cm
Bucket Hinge Pin118.2 in.300.2 cm
Width66.0 in.167.6 cm
Length130.3 in.331.0 cm
Dump Height91.0 in.231.1 cm
Dump Reach29.6 in.75.2 cm
Ground Clearance7.5 in.19.0 cm
Dump Angle42°
Rollback Angle25°
Departure Angle23°

Tire Size


Bobcat S175 Review


Owners of the Bobcat s175 adore it a lot. It is practical for a variety of jobs thanks to the vertical lift design, a 46 hp engine, and a hydraulic flow of about 17 GPM. For many tasks, the Bobcat S175, which replaces the Bobcat 773, is adequate; however, if you require more power, I advise you to look into the Bobcat S185.

error: Content is protected !!