| Manufacturer | Bobcat |
| Model | S300 |
| Type | Skid steer loader |
| Lift Design | Vertical |
| Years Made | 2002-2010 |
Operating Specifications
| US | Metric | |
|---|---|---|
| Horsepower | 81.0 HP | 60.3 kW |
| Lifting Capacity (35% Tipping) | 2100 lbs | 952.5 kg |
| Lifting Capacity (50% Tipping) | 3000 lbs | 1360.8 kg |
| Operating Weight | 8268 lbs | 3750.3 kg |
| Tipping Load | 6111 lbs | 2771.9 kg |
| Lift Breakout Force | 5350 lbs | 2426.7 kg |
| Tilt Breakout Force | 5300 lbs | 2404.0 kg |
| Max. Travel Speed | 6.9 mph | 11.1 km |
| Optional High Speed | 12 mph | 19.3 km |
Cycle Time
| Raise Lift Arms | 4.4 sec. |
| Lower Lift Arms | 3.2 sec. |
| Bucket Rollback | 2.1 sec. |
| Bucket Dump | 2.7 sec. |
Hydraulic System
| US | Metric | |
|---|---|---|
| Pump Flow | 20.7 GPM | 78.4 LPM |
| Relief Pressure | 3300 psi | 227.5 Bar |
| Optional Flow | 36.7 GPM | 138.9 LPM |
| Hydraulic Capacity | 13.0 gal | 49.2 L |
The Bobcat S300 was manufactured from 2002 until 2010.
The Bobcat S300 has a 3,000-pound lifting capacity.
Bobcat S300 is 8,268 pounds in weight.
The Bobcat S300 has a horsepower rating of 81 HP.
The engine that powers the Bobcat S300 is a Kubota V3800-DI-TE3 model.
The Bobcat S300 has a 3.5 gallon engine oil capacity.
The Bobcat S300 hydraulic fluid capacity is 13 gallons.
Bobcat advises using its own all-season hydraulic/hydrostatic fluid.
Engine Specs
| Manufacturer | Kubota |
| Model | V3800-DI-TE3 |
| Type | Diesel |
| Cylinders | 4 |
| Emissions | Tier 3 |
| Rated Speed | 2400 RPM |
| Torque Power | 1600 RPM |
| Combustion | Direct injection |
| Compression Ratio | 19.0 |
| Firing Order | 1-3-4-2 |
| US | Metric | |
|---|---|---|
| Gross Power | 81.0 HP | 60.3 kW |
| Net Power | 78.0 HP | 58.2 kW |
| Displacement | 230 cu in. | 3769 cc |
| Bore | 3.9 in. | 10.0 cm |
| Stroke | 4.7 in. | 12.0 cm |
| Peak Torque | 218 ft-lb | 295.0 N∙m |
| Coolant Capacity | 4.3 gal | 16.3 L |
| Engine Oil Capacity | 3.5 gal | 13.3 L |
| Fuel Tank Capacity | 23.0 gal | 87.1 L |
Dimensions
| US | Metric | |
|---|---|---|
| Height | 80.9 in. | 205.5 cm |
| Bucket Hinge Pin | 128.8 in. | 327.2 cm |
| Width | 72.0 in. | 182.9 cm |
| Length | 142.9 in. | 363.0 cm |
| Dump Height | 99.1 in. | 251.7 cm |
| Dump Reach | 33.8 in. | 85.9 cm |
| Ground Clearance | 8.5 in. | 21.6 cm |
| Dump Angle | 41° |
| Rollback Angle | 32° |
| Departure Angle | 25° |
Tire Size
| Front | 12-16.5 |
| Rear | 12-16.5 |
Since last year, I've been driving a Bobcat S300. If you don't go too fast, one tank of gas will last 7-8 hours. This time will drop to about 4 hours if you are in high flow. Even though the engine is the same as the one in the s250 I used before, I thought the engine in the s300 was a little stronger. The Bobcat s300 has become reliable for me.Bobcat S300 Review
Reliability
Specifications
Price