Manufacturer | Bobcat |
Model | S590 |
Type | Skid steer loader |
Lift Design | Vertical |
Years Made | 2013-2017 |
Bobcat S590 Specs
Bobcat S590 specs are listed below. When reviewing the technical specifications of the Bobcat S590, we recommend keeping the model year in mind. The manufacturer’s manuals were used to publish the Bobcat S590 weight, horsepower, lifting capacity, and other specifications. Make sure to confirm the technical specifications with your seller before purchasing the Bobcat S590. We will add the ASV 4810 review soon to assist you in your purchase.
Operating Specifications
US | Metric | |
---|---|---|
Horsepower | 66.0 HP | 49.2 kW |
Lifting Capacity (35% Tipping) | 1500 lbs | 680.4 kg |
Lifting Capacity (50% Tipping) | 2100 lbs | 952.5 kg |
Operating Weight | 6735 lbs | 3054.9 kg |
Tipping Load | 4200 lbs | 1905.1 kg |
Lift Breakout Force | 4540 lbs | 2059.3 kg |
Tilt Breakout Force | 4356 lbs | 1975.8 kg |
Max. Travel Speed | 7.4 mph | 11.8 km |
Optional High Speed | 11.0 mph | 17.3 km |
Cycle Time
Raise Lift Arms | 3.8 sec. |
Lower Lift Arms | 2.5 sec. |
Bucket Rollback | 1.7 sec. |
Bucket Dump | 2.3 sec. |
Hydraulic System
US | Metric | |
---|---|---|
Pump Flow | 17.1 GPM | 64.7 LPM |
Relief Pressure | 3550 psi | 244.8 Bar |
Optional Flow | 26.7 GPM | 101.1 LPM |
Hydraulic Capacity | 9.5 gal | 36,0 L |
The Bobcat S590 has a horsepower rating of 66 HP.
The used Bobcat S590 costs around $35,000 on average.
The Bobcat S590 has a weight of 6,735 pounds.
The engine that powers the Bobcat S590 is a Kubota V2607-DI-TE3B model.
As most payback terms range between 24 and 72 months, financing and leasing terms for skid-steer loaders are extremely flexible and will not strain the cash flow of the business.
A minimum credit score of 550 is required.
The cost of leasing a skid steer loader depends on the machine’s value, the lease duration, and your credit score. Expect to pay between $500 and $600 per month with good credit to lease a $22,000 machine for five years. Similar equipment leased for three years would cost between $800 and $900 per month.
In 2022, the average annual wage for a skid steer operator will be $50,000.
Engine Specs
Manufacturer | Kubota |
Model | V2607-DI-TE3B |
Type | Diesel |
Cylinders | 4 |
Emissions | Interim Tier 4 |
Rated Speed | 2700 RPM |
Torque Power | 1425 RPM |
Combustion | Direct injection |
Compression Ratio | 19.0 |
Firing Order | 1-3-4-2 |
US | Metric | |
---|---|---|
Gross Power | 66.0 HP | 49.2 kW |
Net Power | 61.0 HP | 45,5 kW |
Displacement | 158.7 cu in. | 2601 cc |
Bore | 3.4 in. | 8.7 cm |
Stroke | 4.3 in. | 11.0 cm |
Peak Torque | 211 ft-lb | 155.6 N∙m |
Coolant Capacity | 3.1 gal | 11.7 L |
Engine Oil Capacity | 2.6 gal | 9.7 L |
Fuel Tank Capacity | 24.8 gal | 93.7 L |
Dimensions
US | Metric | |
---|---|---|
Height | 77.8 in. | 197.6 cm |
Bucket Hinge Pin | 119.0 in. | 302.3 cm |
Width | 65.2 in. | 165.6 cm |
Length | 133.0 in. | 337.8 cm |
Dump Height | 91.3 in. | 231.9 cm |
Dump Reach | 32.6 in. | 82.8 cm |
Ground Clearance | 7.3 in. | 18.5 cm |
Dump Angle | 42° |
Rollback Angle | 30° |
Departure Angle | 24° |
Tire Size
Front | 12-16.5 |
Rear | 12-16.5 |
As long as the previous series, the Bobcat s590 Kubota engine was maintained, it did not cause problems. Sometimes the air filter can become clogged in very dusty areas. I recommend those who work in these areas to pay attention to this problem on this machine. If you're pushing and lifting big, the Bobcat 590 will take care of your work for long hours.Bobcat S590 Review
Reliability
Specifications
Price