Home » Bobcat » Bobcat S70 (2019)

Bobcat S70 (2019)

Bobcat s70 2019 model
TypeSkid steer loader
Lift DesignVertical
Years Made2019
The following features belong to the 2019 model S70 Bobcat. By clicking the button below, you can examine the 2008 model specifications.

Operating Specifications

Horsepower23.5 HP17.5 kW
Lifting Capacity (35% Tipping)
Lifting Capacity (50% Tipping)760 lbs344.7 kg
Operating Weight2892 lbs1311.8 kg
Tipping Load1520 lbs689.5 kg
Lift Breakout Force1935 lbs877.7 kg
Tilt Breakout Force1950 lbs884.5 kg
Push Force2140 lbs970.7 kg
Max. Travel Speed6.3 mph10.1 km

Cycle Time

Raise Lift Arms3.6 sec.
Lower Lift Arms2.7 sec.
Bucket Rollback2.1 sec.
Bucket Dump1.7 sec.

Hydraulic System

Pump Flow9.8 GPM37.1 LPM
Relief Pressure3000 psi206.8 Bar
Optional FlowN/A
Hydraulic Capacity4.0 gal15.1 L
How much does a Bobcat S70 cost?

The Bobcat S70’s new pricing is around $40,000.

What did the Bobcat S70 replace?

The Bobcat 463 was succeeded by the New Bobcat S70, Bobcat’s smallest skid steer loader ever.

What is the smallest Bobcat you can buy?

The smallest skid steer you can buy is the Bobcat S70.

Can a Bobcat fit through a gate?

The Bobcat S70 is 71 inches high and 35 inches wide, making it a skid steer loader to get through with ease.

Is a Bobcat S70 High flow?

No, the Bobcat S70 does not have high flow.

Engine Specs

Rated Speed3000 RPM
Torque Power2200 RPM
CombustionDirect injection
Compression Ratio24:1
Firing Order1-2-3
Gross Power23.5 HP17.5 kW
Displacement61.1 cu in.1001 cc
Bore3.0 in.7.6 cm
Stroke2.9 in.7.4 cm
Peak Torque45.6 ft-lb62.8 N∙m
Coolant Capacity1.8 gal7.0 L
Engine Oil Capacity1.2 gal4.7 L
Fuel Tank Capacity6.5 gal24.6 L


Height71.4 in.181.4 cm
Bucket Hinge Pin94.5 in.240.0 cm
Width36.0 in.91.4 cm
Length97.3 in.247.1 cm
Dump Height74.5 in.189.2 cm
Dump Reach15.8 in.40.1 cm
Ground Clearance5.5 in.14.0 cm
Dump Angle34°
Rollback Angle22°
Departure Angle25°

Tire Size

Front23 – 5.70 x 12
Rear23 – 5.70 x 12
Standard Duty 4 Ply
error: Content is protected !!