Home » Bobcat » Bobcat T770 Steel Track

Bobcat T770 Steel Track

Bobcat t770 steel track
ManufacturerBobcat
ModelT770 (steel track)
TypeCompact track loader
Lift DesignVertical
Years Made2011
Although the Bobcat t770’s emissions have improved over time, its overall characteristics have not changed. Only the steel track and roller suspension (optional) undercarriage model differs in terms of specs. Standard and steel track specs are available by clicking the button below.

Operating Specifications

USMetric
Horsepower92.0 HP68.6 kW
Lifting Capacity (35% Tipping)3000 lbs1360.8 kg
Lifting Capacity (50% Tipping)
Operating Weight11032 lbs5004.0 kg
Tipping Load8571 lbs3887.7 kg
Lift Breakout Force5995 lbs2719.3 kg
Tilt Breakout Force6045 lbs2742.0 kg
Push Force7118 lbs3228.7 kg
Max. Travel Speed6.6 mph10.6 km
Optional High SpeedN/A
Ground Pressure6.2 psi42.7 kPa

Cycle Time

Raise Lift Arms4.0 sec.
Lower Lift Arms2.9 sec.
Bucket Rollback2.1 sec.
Bucket Dump2.3 sec.

Hydraulic System

USMetric
Pump Flow23.0 GPM87.1 LPM
Relief Pressure3550 psi244.8 Bar
Optional Flow36.5 GPM138.2 LPM
Hydraulic Capacity9.5 gal36.0 L

Engine Specs

ManufacturerKubota
ModelV3800-DI-TE3
TypeDiesel
Cylinders4
EmissionsTier 3 (old)
Tier 4 (m series)
Interim Tier 4 (m2 series)
Rated Speed2400 RPM
Torque Power1600 RPM
CombustionDirect injection
Compression Ratio19.0
Firing Order1-3-4-2
USMetric
Gross Power92.0 HP68.6 kW
Net Power88.0 HP65.6 kW
Displacement330 cu in.3769 cc
Bore3.9 in.10.0 cm
Stroke4.7 in.12.0 cm
Peak Torque232.3 ft-lb315.0 N∙m
Coolant Capacity4.0 gal15.1 L
Engine Oil Capacity3.0 gal11.4 L
Fuel Tank Capacity27.2 gal103.1 L

Dimensions

USMetric
Height81.3 in.206.5 cm
Bucket Hinge Pin132.0 in.335.3 cm
Width78.0 in.198.1 cm
Length141.6 in.359.7 cm
Dump Height104.3 in.264.9 cm
Dump Reach33.6 in.85.3 cm
Ground Clearance8.1 in.20.6 cm
Dump Angle42°
Rollback Angle32°
Departure Angle31°

Undercarriage

USMetric
Track Width13.4 in.34.0 cm
Track Length114.3 in.290.3 cm
Ground Contact Length63.7 in.153.2 cm
error: Content is protected !!