Manufacturer | Case |
Model | 1845 |
Type | Skid steer loader |
Lift Design | Radial |
Years Made | 1975-1982 |
Operating Specifications
US | Metric | |
---|---|---|
Horsepower | 49.0 HP | 36.5 kW |
Lifting Capacity (35% Tipping) | 1050 lbs | 476.3 kg |
Lifting Capacity (50% Tipping) | 1700 lbs | 771.1 kg |
Operating Weight | 5825 lbs | 2642.2 kg |
Tipping Load | 2920 lbs | 1324.5 kg |
Lift Breakout Force | 3250 lbs | 1474.2 kg |
Tilt Breakout Force | 4880 lbs | 2213.5 kg |
Max. Travel Speed | 6.2 mph | 10.0 km |
Cycle Time
Raise Lift Arms | 4.5 sec. |
Lower Lift Arms | 4.0 sec. |
Bucket Rollback | 1.7 sec. |
Bucket Dump | 2.3 sec. |
Hydraulic System
US | Metric | |
---|---|---|
Pump Flow | 16.8 GPM | 63.6 LPM |
Relief Pressure | 2250 psi | 155.1 Bar |
Optional Flow | N/A | |
Hydraulic Capacity | 16.8 gal | 63.6 L |
The Case 1845’s diesel engine produced 49 horsepower and could support up to 1,700 pounds of weight. It was also built with small spaces and low roofs in mind. It is simple to sell because it is still widely used today.
Case 1845 was produced from 1975 to 1982.
Case 1845 has an engine made by Case called the 159G.
Case 1845 is 5,825 pounds in weight.
Case 1845 has a 1,700-pound lifting capacity.
Engine Specs
Manufacturer | Case |
Model | 159G |
Type | Gasoline |
Cylinders | 4 |
Emissions | N/A |
Rated Speed | 2200 RPM |
Torque Power | |
Combustion | |
Compression Ratio | 7.42:1 |
Firing Order | 1-3-4-2 |
US | Metric | |
---|---|---|
Gross Power | 49.0 HP | 36.5 kW |
Net Power | 45.0 HP | 33.6 kW |
Displacement | 159 cu in. | 2606 cc |
Bore | 3.5 in. | 8.9 cm |
Stroke | 4.1 in. | 10.5 cm |
Peak Torque | ||
Coolant Capacity | 2.0 gal | 7.6 L |
Engine Oil Capacity | 1.2 gal | 4.7 L |
Fuel Tank Capacity | 19.5 gal | 73.8 L |
Dimensions
US | Metric | |
---|---|---|
Height | 83 in. | 210.8 cm |
Bucket Hinge Pin | 117.0 in. | 353.1 cm |
Width | 63 in. | 160.0 cm |
Length | 127.0 in. | 322.6 cm |
Dump Height | 90.0 in. | 228.6 cm |
Dump Reach | 22.0 in. | 55.9 cm |
Ground Clearance | 8.0 in. | 20.3 cm |
Dump Angle | 41° |
Rollback Angle | 29° |
Departure Angle | 28° |
Tire Size
Front | 7.5×16 |
Rear | 7.5×16 |
The diesel engine in the Case 1845 produced 49 horsepower and could support up to 1,700 pounds of weight. It was also constructed with narrow spaces and low roofs in mind. Selling it is easy because it is still widely used today.Case 1845 Review
Reliability
Specifications
Price