Home » Case » Case 430

Case 430

Case 430 specs
ManufacturerCase
Model430
TypeSkid steer loader
Lift DesignVertical
Years Made2008-2012
The Case 430 specs shown below are from Series 3.

Case 430 Specs

Detailed information on the Case 430 specs may be found in the tables below. We advise keeping the Case 430's model year in mind when perusing its technical specs. The Case 430's dimensions, weight, horsepower, and lifting capacity were take advantage of from the owner's manuals. Before you buy an Case 430, it's important to double-check the specifications with the vendor. The ACase 430 review that you've been waiting for will be available on our site shortly.

Operating Specifications

USMetric
Horsepower82.0 HP61.1 kW
Lifting Capacity (35% Tipping)1355 lbs614.6 kg
Lifting Capacity (50% Tipping)2000 lbs907.2 kg
Operating Weight6800 lbs3084.2 kg
Tipping Load4000 lbs1814.4 kg
Lift Breakout Force4304 lbs1952.3 kg
Tilt Breakout Force5784 lbs2623.4 kg
Max. Travel Speed7.7 mph12.4 km
Optional High Speed12.6 mph20.3 km

Cycle Time

Raise Lift Arms3.6 sec.
Lower Lift Arms2.6 sec.
Bucket Rollback1.6 sec.
Bucket Dump1.3 sec.

Hydraulic System

USMetric
Pump Flow23.8 GPM90.1 LPM
Relief Pressure3050 psi210.3 Bar
Optional Flow33.2 GPM125.7 LPM
Hydraulic Capacity13.2 gal50.0 L
How many horsepower is a Case 430?

The Case 430 has a horsepower rating of 82 HP.

What year was Case 430?

Case 430 was produced from 2008 to 2012.

What motor is a Case 430 skid steer?

Case 430 has an engine made by Case called the 432T/M3.

What does a Case 430 weight?

Case 430 has a weight of 6,800 pounds.

How much can the Case 430 lift?

Case 430 has a lifting capacity of 2,000 lbs.

What is the oil capacity of the Case 430?

The Case 430 oil capacity is 2.2 gallons.

Engine Specs

ManufacturerCase
Model432T/M3
TypeDiesel
Cylinders4
EmissionsTier III
Rated Speed2500 RPM
Torque Power1400 RPM
CombustionDirect injection
Compression Ratio
Firing Order1-3-4-2
USMetric
Gross Power82.0 HP61.1 kW
Net Power77.0 HP57.4 kW
Displacement195 cu in.3195 cc
Bore3.9 in.9.9 cm
Stroke4.1 in.10.4 cm
Peak Torque229 ft-lb310.5 N∙m
Coolant Capacity3.0 gal11.4 L
Engine Oil Capacity2.2 gal8.5 L
Fuel Tank Capacity22 gal83.3 L

Dimensions

USMetric
Height80.0 in.203.2 cm
Bucket Hinge Pin121.6 in.308.9 cm
Width64.2 in.163.0 cm
Length129.4 in.328.7 cm
Dump Height96.0 in.243.8 cm
Dump Reach22.8 in.57.9 cm
Ground Clearance9.2 in.23.4 cm
Dump Angle39°
Rollback Angle29°
Departure Angle28°

Tire Size

Front12 x 16.5
Rear12 x 16.5

Case 430 Review

Reliability
Specifications
Price

For the price, the Case 430 Skid Steer Loader is an good machine. It can be used for a variety of tasks, including road construction, demolition, and snow removal. Case 430 is powerful enough to handle most jobs, but it is also lightweight enough to be easily moved around. The loader arm moves freely, and the bucket can be easily removed and replaced with other attachments. The only disadvantage of this machine is that it lacks power steering, making it difficult to maneuver in small spaces.

User Rating: Be the first one !