| Manufacturer | Case |
| Model | 435 |
| Type | Skid steer loader |
| Lift Design | Vertical |
| Years Made | 2008-2012 |
Operating Specifications
| US | Metric | |
|---|---|---|
| Horsepower | 82.0 HP | 61.1 kW |
| Lifting Capacity (35% Tipping) | 1525 lbs | 691.7 kg |
| Lifting Capacity (50% Tipping) | 2200 lbs | 997.9 kg |
| Operating Weight | 6800 lbs | 3084.2 kg |
| Tipping Load | 4400 lbs | 1995.8 kg |
| Lift Breakout Force | 4400 lbs | 1995.8 kg |
| Tilt Breakout Force | 6800 lbs | 3084.4 kg |
| Max. Travel Speed | 7.0 mph | 11.2 km |
| Optional High Speed | 11.4 mph | 18.3 km |
Cycle Time
| Raise Lift Arms | 4.2 sec. |
| Lower Lift Arms | 3.4 sec. |
| Bucket Rollback | 1.7 sec. |
| Bucket Dump | 1.3 sec. |
Hydraulic System
| US | Metric | |
|---|---|---|
| Pump Flow | 23.8 GPM | 90.1 LPM |
| Relief Pressure | 3050 psi | 210.3 Bar |
| Optional Flow | 33.2 GPM | 125.7 LPM |
| Hydraulic Capacity | 11.0 gal | 41.6 L |
Engine Specs
| Manufacturer | Case |
| Model | 432T/M3 |
| Type | Diesel |
| Cylinders | 4 |
| Emissions | Tier III |
| Rated Speed | 2500 RPM |
| Torque Power | 1400 RPM |
| Combustion | Direct injection |
| Compression Ratio | |
| Firing Order | 1-3-4-2 |
| US | Metric | |
|---|---|---|
| Gross Power | 82.0 HP | 61.1 kW |
| Net Power | 77.0 HP | 57.4 kW |
| Displacement | 195 cu in. | 3195 cc |
| Bore | 3.9 in. | 9.9 cm |
| Stroke | 4.1 in. | 10.4 cm |
| Peak Torque | 229 ft-lb | 310.5 N∙m |
| Coolant Capacity | 3.0 gal | 11.4 L |
| Engine Oil Capacity | 2.2 gal | 8.5 L |
| Fuel Tank Capacity | 17.3 gal | 65.5 L |
Dimensions
| US | Metric | |
|---|---|---|
| Height | 83.2 in. | 211.0 cm |
| Bucket Hinge Pin | 120.0 in. | 305.0 cm |
| Width | 59.9 in. | 152.0 cm |
| Length | 131.3 in. | 334.0 cm |
| Dump Height | 91.6 in. | 233.0 cm |
| Dump Reach | 32.0 in. | 81.0 cm |
| Ground Clearance | 9.3 in. | 23.6 cm |
| Dump Angle | 43° |
| Rollback Angle | 29° |
| Departure Angle | 27° |
Tire Size
| Front | 12×16.5 |
| Rear | 12×16.5 |