Home » Caterpillar » Cat 236d

Cat 236d

Cat 236d specs
TypeSkid steer loader
Lift DesignRadial
Years Made2015-2020

Operating Specifications

Horsepower74.3 HP55.4 kW
Lifting Capacity (35% Tipping)1250 lbs567.0 kg
Lifting Capacity (50% Tipping)1800 lbs816.5 kg
Operating Weight6559 lbs2975.1 kg
Tipping Load3600 lbs1632.9 kg
Lift Breakout Force
Tilt Breakout Force5074 lbs2301.5 kg
Max. Travel Speed7.0 mph11.3 km
Optional High Speed10.6 mph17.1 km

Cycle Time

Raise Lift Arms
Lower Lift Arms
Bucket Rollback
Bucket Dump

Hydraulic System

Pump Flow20.0 GPM75.7 LPM
Relief Pressure3335 psi229.9 Bar
High Flow30.0 GPM113.6 LPM
Hydraulic Capacity13.2 gal50.0 L
Is a Cat 236D high flow?

The Cat 236D has a high flow of 30 GPM.

How much does a CAT 236D weight?

Cat 236D is 6,559 pounds in weight.

How wide is a Cat 236?

Cat 236 wide is 66 inches.

How many horsepower is a 236 CAT skid steer?

236 Cat has 74 HP.

What year is Cat 236?

The Cat 236 was manufactured from 2015 until 2020.

Engine Specs

Model3.3B DIT
Rated Speed3000 RPM
Torque Power1500 RPM
CombustionDirect injection
Compression Ratio
Firing Order
Gross Power74.3 HP55.4 kW
Net Power73.9 HP55.1 kW
Displacement203 cu in.3327 cc
Bore3.7 in.9.4 cm
Stroke4.7 in.12.0 cm
Peak Torque195 lb-ft265 N∙m
Coolant Capacity2.6 gal10.0 L
Engine Oil Capacity2.1 gal7.9 L
Fuel Tank Capacity17.0 gal64.4 L


Height82.0 in.208.2 cm
Bucket Hinge Pin122.9 in.312.2 cm
Width66.0 in.167.6 cm
Length137.3 in.348.7 cm
Dump Height92.9 in.235.9 cm
Dump Reach16.0 in.40.8 cm
Ground Clearance7.7 in.19.5 cm
Dump Angle48°
Rollback Angle34°
Departure Angle26°

Tire Size


Cat 236d Review


The Cat 236d is made so that it is easy for the operator to use. The controls are easy to reach and use, so you don't have to take your hands off the steering wheel for anything other than turning on the car or adjusting the throttle. This machine also has an automatic transmission that lets you move it forward or backward without having to manually change gears. It also has an engine brake clutch that engages automatically when you stop using it. This keeps the machine from moving when you're not using it.

error: Content is protected !!