Home » Gehl » Gehl 4610

Gehl 4610

Gehl 4610 specs
TypeSkid steer loader
Lift DesignRadial
Years Made1987-1992

Gehl 4610 Specs

The information for the Gehl 4610 specs are provided down below. When going through the Gehl 4610's detailed technical specifications, you should bear in mind the model year that the vehicle was produced in. The specs of the Gehl 4610, including its weight, horsepower, lifting capacity, and other aspects, were published with the help of the manufacturer's manuals. Before you buy the Gehl 4610, you should check with your vendor to make sure the technical specs have been confirmed. To be of assistance to you in making your buying decision, we will shortly include our evaluation of the Gehl 4610.

Operating Specifications

Horsepower41.0 HP30.6 kW
Lifting Capacity (35% Tipping)780 lbs353.8 kg
Lifting Capacity (50% Tipping)1225 lbs555.7 kg
Operating Weight4350 lbs1973.1 kg
Tipping Load
Lift Breakout Force
Tilt Breakout Force
Max. Travel Speed6.5 mph10.5 km

Cycle Time

Raise Lift Arms
Lower Lift Arms
Bucket Rollback
Bucket Dump

Hydraulic System

Pump Flow16.0 GPM60.6 LPM
Relief Pressure
Optional Flow32.0 GPM121.1 LPM
Hydraulic Capacity14.0 gal53.0 L
What engine is in a Gehl 4610?

The Gehl 4610 has an engine made by Perkins called the 104-19.

How much does a Gehl 4610 weigh?

Gehl 4610 is 4,350 pounds in weight.

What is the Gehl 4610 tire size?

The Gehl 4610 tire size is 10×16.5.

What is the Gehl 4610’s oil capacity?

The Gehl 4610 hydraulic oil capacity is 14 gallons.

What years did Gehl make the 4610?

The Gehl 4610 was produced from 1987 to 1992.

Engine Specs

Rated Speed2800 RPM
Torque Power1700 RPM
Compression Ratio22:1
Firing Order1-3-4-2
Gross Power41.0 HP30.6 kW
Displacement122 cu in.1995 cc
Bore3.3 in.8.4 cm
Stroke3.5 in.8.9 cm
Peak Torque88 ft-lb119.3 N∙m
Coolant Capacity
Engine Oil Capacity
Fuel Tank Capacity13.0 gal49.2 L


Height76.0 in.193.0 cm
Bucket Hinge Pin114.5 in.290.8 cm
Width63.0 in.160.0 cm
Length114.8 in.291.5 cm
Dump Height
Dump Reach18.0 in.45.7 cm
Ground Clearance8.0 in.20.3 cm
Dump Angle41°
Rollback Angle33°
Departure Angle26°

Tire Size


Gehl 4610 Review


The Gehl 4610 is intended for use in factories, warehouses, and other commercial spaces. Gehl SL4610 is a good loader for loading, unloading, and moving materials around a warehouse or construction site.

error: Content is protected !!