Home » Gehl » Gehl 5635

Gehl 5635

Gehl 5635 specs
Model5635 Sx
TypeSkid steer loader
Lift DesignVertical
Years Made1988 – 1996

Operating Specifications

Horsepower60.0 HP44.7 kW
Lifting Capacity (35% Tipping)
Lifting Capacity (50% Tipping)1900 lbs861.8 kg
Operating Weight7170 lbs3252.3 kg
Tipping Load
Lift Breakout Force
Tilt Breakout Force
Max. Travel Speed8.5 mph13.7 km
Optional High Speed12.5 mph20.1 km

Cycle Time

Raise Lift Arms
Lower Lift Arms
Bucket Rollback
Bucket Dump

Hydraulic System

Pump Flow23.0 GPM87.1 LPM
Relief Pressure3000 psi206.8 Bar
Optional FlowN/A
Hydraulic Capacity16.0 gal60.5 L
How much can a Gehl 5635 lift?

The Gehl 5635 has a 1,900-pound lifting capacity.

What engine is in a Gehl 5635?

The Gehl 5635 is powered by an engine made by Deutz. The model number of this engine is F4M1011F.

How heavy is a Gehl 5635SXT?

The weight of the Gehl 5635SXT is 7,170 pounds.

What years did Gehl make the 5635SX?

The Gehl 5635SX was manufactured from 1988 until 1996.

What is the Gehl 5635 tire size?

The Gehl 5635 tire size is 12×16.5.

Engine Specs

EmissionsLevel 2
Rated Speed2650 RPM
Torque Power1800 RPM
CombustionDirect injection
Compression Ratio17:1
Firing Order1-3-4-2
Gross Power60.0 HP44.7 kW
Net Power56.0 HP41.8 kW
Displacement178 cu in.2917 cc
Bore3.6 in.9.1 cm
Stroke4.1 in.10.5 cm
Peak Torque130 ft-lb176.3 N∙m
Coolant Capacity3.0 gal11.3 L
Engine Oil Capacity2.6 gal10.0 L
Fuel Tank Capacity19.0 gal72.0 L


Height79.2 in.201.3 cm
Bucket Hinge Pin122.7 in.311.7 cm
Width66.2 in.168.1 cm
Length133.0 in.337.8 cm
Dump Height93.7 in.238.0 cm
Dump Reach33.0 in.83.8 cm
Ground Clearance7.5 in.19.0 cm
Dump Angle40°
Rollback Angle30°
Departure Angle25°

Tire Size

Front12 x 16.5
Rear12 x 16.5

Gehl 5635 Review


The Gehl 5635 skid steer is a versatile machine that can be used for a variety of tasks. The Gehl 5635SX is not too expensive, and it does everything you need it to do.

error: Content is protected !!