Home » John Deere » John Deere 320d

John Deere 320d

John Deere 320D specs
ManufacturerJohn Deere
Model320D
TypeSkid steer loader
Lift DesignVertical
Years Made2009-2014

Operating Specifications

USMetric
Horsepower68.0 HP50.7 kW
Lifting Capacity (35% Tipping)1350 lbs612.3 kg
Lifting Capacity (50% Tipping)2000 lbs907.2 kg
Operating Weight6600 lbs2993.7 kg
Tipping Load4000 lbs1814.4 kg
Lift Breakout Force5125 lbs2324.7 kg
Tilt Breakout Force3500 lbs1587.6 kg
Max. Travel Speed6.8 mph10.9 km
Optional High Speed10.1 mph16.3 km

Cycle Time

Raise Lift Arms
Lower Lift Arms
Bucket Rollback
Bucket Dump

Hydraulic System

USMetric
Pump Flow20.0 GPM75.7 LPM
Relief Pressure3100 psi213.7 Bar
Optional Flow31.0 GPM117.3 LPM
Hydraulic Capacity18.0 gal68.1 L
How many horsepower is a 320D John Deere skid steer?

320D John Deere has 68 horsepower.

How much does a John Deere 320D skid steer weigh?

John Deere 320D weighs 6,600 pounds.

What engine is in a John Deere 320D skid steer?

The John Deere 320D is powered by a John Deere 4024HT engine.

How much can a JD 320D lift?

The JD 320D has a 2,000-pound lifting capacity.

What years did John Deere make the 320D?

The John Deere 320D was manufactured from 2009 until 2014.

Engine Specs

ManufacturerJohn Deere
Model4024HT
TypeDiesel
Cylinders4
EmissionsInterim Tier 4
Rated Speed2600 RPM
Torque Power1950 RPM
CombustionDirect injection
Compression Ratio18.2:1
Firing Order1-3-4-2
USMetric
Gross Power63.0 HP47.0 kW
Net Power58.0 HP43.3 kW
Displacement149 cu in.2441 cc
Bore3.1 in.8.6 cm
Stroke4.4 in.10.5 cm
Peak Torque162 ft-lb219.6 N∙m
Coolant Capacity
Engine Oil Capacity
Fuel Tank Capacity19.0 gal71.9 L

Dimensions

USMetric
Height79.3 in.201.3 cm
Bucket Hinge Pin118.9 in.302.1 cm
Width69.4 in.176.2 cm
Length132.3 in.336.1 cm
Dump Height95.4 in.242.4 cm
Dump Reach36.3 in.92.1 cm
Ground Clearance10.0 in.25.4 cm
Dump Angle42°
Rollback Angle32°
Departure Angle28°

Tire Size

Front10×16.5
Rear10×16.5

John Deere 320d Review

Reliability
Specifications
Price

The John Deere 320d is ideal for medium-sized jobs. Its engine and hydraulics will serve you well. If you're a big guy like me, the cabin might be a little tight. Other than that, I didn't like the bucket getting too close to the cabin. If these two problems are not your priorities, they are among the good according to the class.

error: Content is protected !!