Home » John Deere » John Deere 8875

John Deere 8875

John Deere 8875
ManufacturerJohn Deere
TypeSkid steer loader
Lift DesignVertical
Years Made1994-1998

Operating Specifications

Horsepower64.4 HP48.0 kW
Lifting Capacity (35% Tipping)1750 lbs793.8 kg
Lifting Capacity (50% Tipping)2350 lbs1065.9 kg
Operating Weight7000 lbs3175.4 kg
Tipping Load5000 lbs2268.0 kg
Lift Breakout Force5200 lbs2358.7 kg
Tilt Breakout Force6300 lbs2857.6 kg
Max. Travel Speed7.6 mph12.2 km
Optional High Speed12.1 mph19.6 km

Cycle Time

Raise Lift Arms3.6 sec.
Lower Lift Arms1.5 sec.
Bucket Rollback1.8 sec.
Bucket Dump2.4 sec.

Hydraulic System

Pump Flow17.6 GPM66.6 LPM
Relief Pressure2600 psi179.3 Bar
Optional FlowN/A
Hydraulic Capacity6.8 gal25.5 L
What years did John Deere make 8875 skid steer?

The John Deere 8875 skid steer was produced from 1994 to 1998.

How much does an 8875 John Deere skid steer weigh?

The 8875 John Deere skid steer weighs 7,000 pounds.

What skid steer can lift 2,000 lbs?

If you’re looking for a low-cost skid loader that can lift medium-sized loads up to 2000 pounds, consider the John Deere 8875.

How many horsepower is a John Deere 8875?

The John Deere 8875 has 64 horsepower.

What engine is in a JD 8875?

The engine that powers the JD 8875 is manufactured by John Deere and is model number 3029t.

Engine Specs

ManufacturerJohn Deere
EmissionsTier I
Rated Speed2400 RPM
Torque Power1600 RPM
CombustionDirect injection
Compression Ratio17.8:1
Firing Order1-2-3
Gross Power64.4 HP48.0 kW
Net Power61.0 HP45.5 kW
Displacement179 cu in.2933 cc
Bore4.2 in.10.6 cm
Stroke4.3 in.11.0 cm
Peak Torque109 ft-lb148.1 N∙m
Coolant Capacity2.8 gal10.6 L
Engine Oil Capacity2.0 gal7.4 L
Fuel Tank Capacity18.8 gal71.2 L


Height72.0 in.182.9 cm
Bucket Hinge Pin122.0 in.309.9 cm
Width69.0 in.175.3 cm
Length142.0 in.360.7 cm
Dump Height97.0 in.246.4 cm
Dump Reach30.0 in.76.2 cm
Ground Clearance8.0 in.20.3 cm
Dump Angle45°
Rollback Angle37°
Departure Angle28°

Tire Size


John Deere 8875 Review


The John Deere 8875 skid steer loader is designed for light work and mid weights. It is an ideal choice for people who require a machine that can handle any job but do not want to spend money on a costly machine.

error: Content is protected !!