Manufacturer | New Holland |
Model | Ls190 |
Type | Skid steer loader |
Lift Design | Vertical |
Years Made | 2000-2007 |
Operating Specifications
US | Metric | |
---|---|---|
Horsepower | 83.0 HP | 61.9 kW |
Lifting Capacity (35% Tipping) | 1950 lbs | 884.5 kg |
Lifting Capacity (50% Tipping) | 2800 lbs | 1270.1 kg |
Operating Weight | 7850 lbs | 3560.7 kg |
Tipping Load | ||
Lift Breakout Force | ||
Tilt Breakout Force | ||
Max. Travel Speed | 7.6 mph | 12.2 km |
Optional High Speed | 12.1 mph | 19.5 km |
Cycle Time
Raise Lift Arms | 3.9 sec. |
Lower Lift Arms | 2.8 sec. |
Bucket Rollback | 2.5 sec. |
Bucket Dump | 2.2 sec. |
Hydraulic System
US | Metric | |
---|---|---|
Pump Flow | 20.0 GPM | 75.7 LPM |
Relief Pressure | 3500 psi | 241.3 Bar |
Optional Flow | 33.8 GPM | 127.9 LPM |
Hydraulic Capacity | 11.3 gal | 42.6 L |
How much does a New Holland LS190 weight?
New Holland LS190 is 7,850 pounds in weight.
What engine is in a New Holland LS190?
The New Holland 450/NC engine powers the New Holland LS190.
What years were the New Holland LS190 made?
The New Holland LS190 was produced from 2000 to 2007.
What is the lift capacity of a New Holland LS190?
The New Holland LS190 has the lifting capacity of 2,800 lbs.
How wide is a New Holland LS190?
New Holland LS190 has a width of 78 inches.
Engine Specs
Manufacturer | New Holland |
Model | 450/NC |
Type | Diesel |
Cylinders | 3 |
Emissions | Tier 2 |
Rated Speed | 2200 RPM |
Torque Power | 1400 RPM |
Combustion | Direct injection |
Compression Ratio | 17.5:1 |
Firing Order | 1-2-3 |
US | Metric | |
---|---|---|
Gross Power | 67.0 HP | 50.0 kW |
Net Power | 60.0 HP | 44.7 kW |
Displacement | 192 cu in. | 3146 cc |
Bore | 4.4 in. | 11.2 cm |
Stroke | 4.2 in. | 10.7 cm |
Peak Torque | 187 ft-lb | 253.5 N∙m |
Coolant Capacity | 3.9 gal | 14.7 L |
Engine Oil Capacity | 1.7 gal | 6.6 L |
Fuel Tank Capacity | 18.0 gal | 68.1 L |
Dimensions
US | Metric | |
---|---|---|
Height | 79.4 in. | 201.7 cm |
Bucket Hinge Pin | 124.1 in. | 315.2 cm |
Width | 78.0 in. | 198.1 cm |
Length | 147.3 in. | 374.1 cm |
Dump Height | 100.6 in. | 255.3 cm |
Dump Reach | 31.5 in. | 80.0 cm |
Ground Clearance | 9.9 in. | 25.1 cm |
Dump Angle | 47° |
Rollback Angle | 37° |
Departure Angle | 27° |
Tire Size
Front | 14×17.5 |
Rear | 14×17.5 |
New Holland L190 Review
Reliability
Specifications
Price
The New Holland L190 skid loader is a small, narrow-width utility loader that is ideal for small to medium-sized job sites. Its small size lets you work in tight spaces where bigger machines can't go. It still has the power and capacity you need, though. The L190 loader has a smooth hydraulic system with lubrication that flows through it. This lowers operating costs and increases uptime.