Home » Takeuchi » Takeuchi Tl10

Takeuchi Tl10

Takeuchi tl10 specs
TypeCompact track loader
Lift DesignRadial
Years Made2010-2017

Operating Specifications

Horsepower92.0 HP68.6 kW
Lifting Capacity (35% Tipping)2400 lbs1088.6 kg
Lifting Capacity (50% Tipping)3450 lbs1564.9 kg
Operating Weight10500 lbs4762.7 kg
Tipping Load6850 lbs3107.1 kg
Lift Breakout Force7425 lbs3367.9 kg
Tilt Breakout Force7400 lbs3356.6 kg
Max. Travel Speed4.6 mph7.4 km
Optional High Speed7.2 mph11.6 km
Ground Pressure4.4 psi30.2 kPa

Cycle Time

Raise Lift Arms
Lower Lift Arms
Bucket Rollback
Bucket Dump

Hydraulic System

Pump Flow20.0 GPM75.7 LPM
Relief Pressure3050 psi210.3 Bar
Optional Flow36.0 GPM136.3 LPM
Hydraulic Capacity19.5 gal74.0 L
How much does a Takeuchi TL10 weight?

The Takeuchi TL10 has a weight of 10,500 pounds.

How many horsepower is a TL10?

The Takeuchi TL10 has a 92 horsepower rating.

Is Takeuchi TL10 high flow?

The Takeuchi TL10 has a high flow of 36 GPM.

What years did Kubota make the Takeuchi TL10?

The Takeuchi TL10 was produced from 2010 to 2017.

How much can a TL10 lift?

The Takeuchi TL10 has a 3,450-pound lifting capacity.

Engine Specs

EmissionsTier 4
Rated Speed2400 RPM
Torque Power1500 RPM
CombustionDirect injection
Compression Ratio17:5
Firing Order1-3-4-2
Gross Power92.0 HP68.6 kW
Net Power86.4 HP64.4 kW
Displacement229.4 cu in.3769 cc
Bore3.9 in.10.0 cm
Stroke4.7 in.12.0 cm
Peak Torque247 ft-lb334.9 N∙m
Coolant Capacity4.1 gal15.5 L
Engine Oil Capacity3.5 gal13.2 L
Fuel Tank Capacity23.8 gal90.0 L


Height89.4 in.227.0 cm
Bucket Hinge Pin122.8 in.312.0 cm
Width69.7 in.177.0 cm
Length147.8 in.375.5 cm
Dump Height94.7 in.240.5 cm
Dump Reach34.4 in.87.5 cm
Ground Clearance12.8 in.32.5 cm
Dump Angle39°
Rollback Angle31°
Departure Angle30°


Track Width17.7 in.45.0 cm
Track Length107.9 in.274.1 cm
Ground Contact Length58.9 in.149.5 cm

Takeuchi TL10 Review


The Takeuchi TL10 loader is an excellent addition to any business. It can transport up to 123 inches of sand, gravel, crushed rock, and soil. It is mostly used to load and unload materials and to grade and level the ground. The operating capacity of the Takeuchi TL10 loader is 3,450 lbs., which is more than enough for most jobs.

error: Content is protected !!