• Thank you for visiting Skidsteers.net. Thanks to your continued support and popular demand, we've added a forum to our site. We hope it becomes a valuable place for you to connect, ask questions, and share your experience. You may also find the links below helpful.

    After registering, please remember to check your spam/junk folder for the confirmation email if you don't see it in your inbox.

    Specifications Compare Find Model

Recent content by Admin

  1. Admin

    Oil Level Overfull

    That’s actually really solid troubleshooting on your end, draining it that long and refilling slowly rules out a lot. At 7 quarts hitting the full mark without even running it, I would be very confident the dipstick or tube is not correct for that machine. You basically proved it already. What...
  2. Admin

    Hooks on mmM610 and M700 front

    Those front hooks were mainly for lifting and tie-down, not really for running it like a forklift. Guys used them to pick the machine with chains when loading onto a trailer or for service work. On some older Bobcats you’ll see people hook a bar or chains there to move things, but it wasn’t...
  3. Admin

    how much does a skid steer weigh once you count attachments and trailer

    A lot of people ask how much does a skid steer weigh when they’re really trying to answer a different question about towing, trailer capacity, ballast, or machine size. The safest approach is to start with the official operating weight for the exact model, then add the real-world extras like...
  4. Admin

    Anyone Running a Skid Steer Log Splitter Attachment

    Cone splitters are incredibly fast when the wood grain is straight. Instead of pushing the log through a wedge like a normal skid steer log splitter, the rotating cone pulls itself into the wood and forces it apart. The downside is twisted grain. When the wood binds it can jerk the log around...
  5. Admin

    New Member From Missouri

    Welcome to the forum. Feel free to browse the equipment sections and start a thread if you ever run into a problem or need advice. Members here have a lot of hands-on experience with different machines and attachments.
  6. Admin

    Stump Bucket Turned Into a Tree Stump Planter by Accident Anyone Else Doing This

    Your homemade angle is what I like here. A stump bucket can be a tree stump planter if the geometry is friendly. The “rolled vs bent” question matters because a rolled scoop gives you a smoother cradle for root balls and rocks. A sharp bend tends to grab dirt but also creates a pressure line...
  7. Admin

    ISO 46 Hydraulic Fluid vs 10W-30 Motor Oil in Hydraulics What’s Actually Better

    Let me explain ISO 46 in plain language because once that clicks, the rest gets easier. When people say iso 46 hydraulic fluid, they usually mean an anti-wear hydraulic oil in the ISO VG 46 viscosity grade (you’ll see names like AW-46 or HM 46 depending on region and spec language). The key...
  8. Admin

    Confused About Mini Skid Steer Attachments and Mount Types What Actually Fits What

    This is a super common problem and you’re not alone. The reason it feels confusing is because “mini skid steer attachments” isn’t one single standard, and sellers often use the word “universal” in a lazy way. Here’s the practical way to think about it. There are two big categories you should...
  9. Admin

    Walk Behind Skid Steer vs Stand On Skid Steer on Slopes Real World Advice Before You Buy

    I’ll try to give you the answer I wish somebody gave me before my first rental. A lot of people use “walk behind skid steer” and “stand on skid steer” like they mean the same thing, but in real use the operator position changes everything. When you are walking behind the machine you naturally...
  10. Admin

    What Temperature is Normal on a Bobcat Mini Excavator with Kubota Engine?

    People stress too much about exact numbers. Most Kubota diesels are designed to run hotter than older machines. Seeing around 200°F or even slightly above under load isn’t unusual as long as coolant level is good and the temp stabilizes instead of climbing nonstop. Where you need to pay...
  11. Admin

    Modified a Brush Cutter to Fit a Skid Steer

    We tried running a homemade setup years ago. The biggest issue was visibility and debris flying everywhere because it wasn’t designed for front mounting. Proper skid steer brush cutters are built heavier for a reason.
  12. Admin

    Bobcat Showing Old Faults After Repair Anyone Know How to Clear Them

    On Bobcats you’re usually dealing with two things: active codes and logged history. Active ones disappear once the machine sees normal readings again. Logged ones can stay there for a long time because they’re basically a record of what happened. A lot of owners assume something is still wrong...
  13. Admin

    Hey Everyone Just Wanted to Say Hi

    Welcome ;) Good to see new members joining early on. We’re still building the community, so every new voice helps shape the place. Feel free to jump into any discussions and don’t hesitate to start new topics. Glad you’re here.
  14. Admin

    Cat quick attach feels tight sometimes normal?

    Had this happen a lot during muddy jobs. The latch would look fine but wouldn’t release smoothly. Cleaning it out and keeping it greased made a big difference.
  15. Admin

    What kind of jobs are you mostly using your skid steer for?

    Mine started out mainly for landscaping but over time it turned into the machine that does a bit of everything. Moving pallets one day, grading the next, then snow in winter. That flexibility is honestly why I keep it around even when bigger equipment would be faster for certain jobs.
See more
Back
Top